Zoeller, 10-1450, Maintenance Free Battery

Zoeller 10-1450 – Aquanot® Maintenance-Free AGM Deep-Cycle Battery

The Zoeller 10-1450 Aquanot® battery is an AGM (Absorbent Glass Mat) deep-cycle backup power source engineered for use with 12V DC battery-operated sump pump systems, including the Zoeller Basement Sentry® Series. Designed for consistent discharge performance and long service life, this sealed lead-acid battery supports critical basement drainage operations during power outages or pump system failures.

Featuring a 72 amp-hour nominal capacity, the 10-1450 delivers 5–7 hours of continuous run time under standard load conditions. Its maintenance-free, valve-regulated design eliminates the need for fluid checks or electrolyte refills, making it ideal for restricted-access installations or remote monitoring environments.

Product Features

• ✅ AGM Technology – Glass mat separators retain electrolyte within a sealed matrix, enabling safe horizontal or vertical orientation and improved vibration resistance.
• ✅ Maintenance-Free Operation – Valve-regulated construction ensures no water loss or acid stratification, eliminating manual servicing.
• ✅ Sealed Non-Spillable Design – Leak-proof case prevents acid exposure during charging, discharge, or transport.
• ✅ High Reserve Capacity – Nominal 72 amp-hour rating supports extended sump pump operation in backup conditions.
• ✅ OEM Approved for Backup Systems – Certified for compatibility with Zoeller 507/508/585/803 backup sump systems and equivalent 12V DC pump controls.

Technical Specifications

• Battery Type: Absorbent Glass Mat (AGM), sealed lead-acid
• Voltage: 12 VDC
• Capacity: 72 Ah at 20-hour discharge rate
• Dimensions: 12-3/4" L × 7-1/2" W × 10" H
• Weight: Approx. 50 lbs
• Regulatory: Non-spillable, DOT approved for ground transport

Installation Guidelines

Battery should be installed in a well-ventilated area in an upright position (unless otherwise specified by manufacturer). Ensure proper polarity and terminal torque during installation. Use only battery cables rated for DC backup systems and confirm charger compatibility before system power-up. Battery must be fully charged before initial operation to maximize lifespan and discharge performance.

System connections should follow manufacturer wiring schematics for the corresponding sump pump controller. Replace battery every 3–5 years or as required based on discharge cycles and inspection results.

Use Applications

Designed for sump pump systems requiring dependable deep-discharge power for residential or light commercial use. Commonly deployed in conjunction with Zoeller's Basement Sentry® 507, 508, and 585 systems. Also suitable for compatible third-party 12V backup pump systems requiring sealed, non-maintenance batteries.

Included Attributes

• ✅ 12V AGM deep-cycle construction for extended discharge performance
• ✅ Non-spillable housing with maintenance-free operation
• ✅ Heavy-duty internal plates for backup sump system cycling loads
• ✅ Factory-tested to meet discharge curve and reserve capacity targets

Contractor Notes

Verify battery age and charge status prior to installation. All terminals must be free of corrosion and fully tightened to prevent voltage drops. Replace batteries based on load testing intervals or age tracking, as performance degradation may not be visually evident. Compatible with most 12V sump pump controllers using standard battery cases.