72" Shower Wall System, White

Mustee 260 DURAWALL® Five-Panel Thermoplastic Shower Wall System

The Mustee 260 is a five-piece shower wall system fabricated from high-impact, molded thermoplastic. Engineered for 30" x 60" alcove shower and tub installations, this wall set is suitable for both new construction and remodeling applications. It is designed to adhere directly to wall substrates using construction-grade adhesive or mechanical fasteners, offering a practical solution where tile or solid-surface systems are not required.

Product Features

• Material: Co-extruded thermoplastic construction resists impact, abrasion, and typical bathroom moisture exposure.
• Five-Piece Configuration: Includes back panel, two corner panels, and two end panels for three-wall alcove installation.
• Six Integral Storage Recesses: Molded-in shelf features located in corner panels provide built-in storage with no additional framing required.
• Overlapping Panel Design: Integrated flanges and overlap joints reduce the need for exposed caulking while helping prevent water intrusion.
• Trim-to-Fit Capability: Side panels can be cut to fit non-standard or out-of-square alcove conditions.

Technical Specifications

• Wall Height: 71-1/2"
• Nominal Alcove Fit: 30" D x 60" W (compatible with Mustee 3060 ShowerTub™ and standard-size tubs)
• Panel Count: 5
• Finish: Gloss-textured surface with color-matched finish (White or Bone)
• Installation Method: Direct-to-wall adhesive or mechanical fasteners (not included)
• Domestic/Import: Manufactured in USA

Installation Guidance

This wall system is intended for installation over water-resistant wallboard or properly prepared drywall. Panels may be trimmed using standard cutting tools. Fastening flanges are concealed behind each overlapping edge for a finished appearance. A dry-fit test is recommended before applying adhesive to verify proper alignment. Professional installation is advised for best water containment and code compliance in residential applications.

Notes for Contractors

• Compatible Bases: Use with Mustee’s 3060 ShowerTub™, similar-size receptor bases, or cast iron/enamel tubs with standard apron height.
• Wall Surface Prep: Substrate must be flat, dry, and free of debris prior to adhesive bonding.
• Field Adjustability: Panel design allows on-site trimming to accommodate walls that are not square or plumb.