500' Copper Tracer Wire, 14 Gauge

Wal-Rich 1842500 – 14 AWG Solid Copper Tracer Wire, 500' Coil

The Wal-Rich 1842500 tracer wire is designed for underground utility marking and location, particularly for polyethylene gas piping installations. Featuring a solid copper conductor and high-density polyethylene (HDPE) insulation, this 14-gauge tracer wire provides consistent conductivity and long-term durability under buried conditions.

Suitable for use in both open trench and directional boring applications, the yellow insulation denotes its use with underground gas systems per APWA color standards. This product supports compliance with locating and damage prevention protocols required on job sites involving pressurized gas lines.

Application-Specific Features

• ✅ Solid Copper Conductor – Provides high signal strength for accurate traceability with standard locating equipment.
• ✅ HDPE Insulation (Yellow) – Offers superior abrasion resistance and moisture barrier for direct burial in native soil or backfill.
• ✅ Color-Coded for Gas Utility – Yellow jacket color complies with industry-standard utility marking designations.
• ✅ 500' Coil Length – Supports medium-to-large scale projects with minimal need for splices or connectors.

Technical Specifications

• Conductor Material: Solid copper
• Gauge: 14 AWG
• Insulation Material: High-density polyethylene (HDPE)
• Color: Yellow (gas line designation)
• Length: 500 feet per coil
• Temperature Rating: Up to 75°C (167°F) dry
• Voltage Rating: 30V (nominal for tracer circuits)

Installation Overview

This tracer wire is intended for use in conjunction with underground PE gas pipe. Install alongside the pipe with a consistent path, avoiding kinks or sharp bends. Leave adequate lead extensions at risers or termination boxes to permit access for signal transmission equipment. Connections must be made with corrosion-resistant splice kits rated for direct burial.

Tracer wire installation must conform to applicable local codes and utility company requirements. For directional boring applications or environments with high soil conductivity, consider upsizing to lower gauge or using jacketed multi-conductor options when required by spec.

Job Site Use and Specification Compliance

Engineered for professional installation in natural gas distribution systems, municipal infrastructure, and residential service lines. Wal-Rich tracer wire meets utility specifications for signal transmission, durability, and identification, supporting compliance with utility damage prevention standards and DOT pipeline marking regulations.

Included Characteristics

• ✅ Delivered as a 500' coil with factory-applied HDPE jacketing
• ✅ Compatible with most common pipe locating transmitters and receivers
• ✅ Resistant to UV, water, and chemical exposure under normal soil conditions
• ✅ Made in accordance with ASTM standards for underground tracer wire conductors

Contractor Notes

Always verify tracer continuity after installation using a line locator. Use approved ground rod or termination box at access points to enhance traceability. For horizontal boring, consult with the engineer of record regarding minimum wire specifications and pull strength requirements.