3 inch x 3 inch x 2 inch PVC DWV Reducing Fitting Tee Plastic x Fitting x Plastic
6 Available At All US Supply Locations
3 Inch x 3 Inch x 2 Inch PVC DWV Reducing Tee – Hub x Hub x Hub
This 3 inch x 3 inch x 2 inch PVC DWV reducing tee is designed to connect three drain, waste, or vent (DWV) lines of differing sizes within non-pressurized plumbing systems. With a straight-through run for 3-inch nominal pipe and a 2-inch reduced branch outlet, this fitting provides a smooth directional transition to maintain proper drainage and venting performance.
Material and Dimensional Standards
- ✅ Material: Polyvinyl Chloride (PVC), Type I Grade I per ASTM D1784
- ✅ Compliance: Manufactured in accordance with ASTM D2665 for DWV fittings
- ✅ Connection Ends: Slip x Slip x Slip (socket-style solvent weld)
- ✅ Configuration: 3 inch x 3 inch x 2 inch reducing tee, with 90° branch
- ✅ Wall Rating: Schedule 40
Applications
- ✅ Drainage and Waste Transitions – Used to connect a smaller branch line (2 inch) to a main line (3 inch) in gravity-fed DWV systems
- ✅ Vent Systems – Allows for code-compliant air admittance and venting in multistory plumbing assemblies
- ✅ New Construction and Retrofit – Common in slab, wall, and crawlspace installations
Installation Considerations
All connections are solvent-welded. Use ASTM F656 primer and ASTM D2564 solvent cement for proper bonding. Clean and dry all mating surfaces prior to joining. Allow sufficient cure time before testing per manufacturer and code requirements. Ensure correct orientation of the reducing outlet to maintain proper flow direction and prevent obstruction.
Performance Notes
DWV PVC fittings are designed for non-pressurized systems only. They are resistant to a broad range of common household and industrial chemicals and suitable for buried or exposed use when protected from UV exposure. Not for use in hot water or pressurized potable applications unless specified.
Typical Use Cases
- Horizontal branch takeoffs from 3 inch waste mains
- Vertical stacks transitioning to 2 inch drain lines
- Connecting fixture drains to main trunk lines with size reduction
Specifications
| Weight | 0.850000 |
|---|---|
| Brand | Spears |
| ADA Compliance | No |
| Color | White |
| Length (inches) | 8.88 |
| Width (inches) | 3 |
| Height (inches) | 8.88 |
| End Style | Plastic x Fitting x Plastic |
| Side A | 3" |
| Side B | 3" |
| Side C | 2" |
| Fitting Type | Tees |
| Item Type | Fittings |
| Manufacturer | Spears Manufacturing |
| MPN | P404-338 |
| Material | PVC DWV |
| Product Family | Fittings |
| Nominal Size | 3 x 3 x 2 in |
| Item Returns | This item can be returned |