3/8 inch Copper Tee Copper x Copper x Copper

3/8 inch Copper Tee – Wrot Copper, Lead-Free, C x C x C

The 3/8 inch Copper Tee is a solder joint fitting used for branching copper tube lines in potable water, HVAC, and hydronic systems. This tee features three copper solder cups (C x C x C) and is manufactured from lead-free wrot copper for use in pressure-rated systems that require compliance with modern plumbing and mechanical codes.

Conforming to ASME B16.22 and produced in accordance with ASTM B75 or B88, this fitting is intended for joining Type L or Type M copper tubing. It is suitable for above-ground installations in residential, commercial, and institutional construction.

Product Features

• ✅ Material: Lead-free wrot copper (≤0.25% Pb), certified under NSF/ANSI 61 and 372
• ✅ Connection Type: C x C x C – sweat (solder joint) ends
• ✅ Nominal Size: 3/8 inch
• ✅ Pressure Rating: Suitable for use up to 200 PSI at 250°F when installed per code
• ✅ Compliance: ASME B16.22, ASTM B88/B75, NSF/ANSI 61 & 372

Installation Guidelines

Prepare tube ends and fitting sockets with emery cloth or a fitting brush. Apply lead-free soldering flux and assemble while heating with an approved torch. Solder should fully flow into the joint to ensure proper capillary seal. Follow all local code requirements for testing and inspection.

Typical Applications

This copper tee is commonly used to split or redirect flow in water distribution systems, including cold/hot potable water, closed-loop hydronic heating, and chilled water lines. Its compact configuration makes it suitable for installation in tight spaces such as behind walls or in mechanical rooms.

Code Compliance

This product meets federal Safe Drinking Water Act requirements and is approved for use in potable water systems in all jurisdictions mandating the use of lead-free components. Certified to NSF/ANSI 61 and 372 standards.

Technical Specifications

• Nominal Size: 3/8 inch
• Connection Type: C x C x C (solder cups)
• Material: Lead-Free Wrot Copper
• Certifications: NSF/ANSI 61 & 372, ASME B16.22, ASTM B75/B88

The 3/8 inch Copper Tee provides a code-compliant solution for branching copper tubing systems. It supports long-term system performance in both pressurized potable and mechanical piping networks.