3/4 inch x 1/2 inch x 1/2 inch Copper Reducing Tee Copper x Copper x Copper

3/4 inch x 1/2 inch x 1/2 inch Copper Press Tee – Reducing Branch Tee for Potable Water and Hydronic Systems

The 3/4 inch x 1/2 inch x 1/2 inch Copper Press Tee is a reducing tee fitting designed for use in press-connect piping systems. Manufactured from lead-free wrought copper, this tee provides a mechanically secure and flame-free connection for joining three copper tube sections in potable water, chilled water, and low-pressure hydronic heating systems.

Engineered for compatibility with standard press tools and jaws, this tee includes integrated sealing elements and reduced-branch dimensions to support compact installation in tight spaces. It is suitable for use in both vertical and horizontal orientations and is certified for above-ground copper press applications.

Product Features

• ✅ Material: Lead-free wrought copper conforming to ASTM B75/B88 standards.
• ✅ Configuration: Press x Press x Press tee with 3/4 inch main run and dual 1/2 inch reducing branches (C x C x C).
• ✅ Sealing Mechanism: Pre-installed EPDM sealing elements rated for potable water and HVAC applications.
• ✅ Joining Method: Press connection using approved hydraulic tools – eliminates the need for soldering or open flames.
• ✅ Lead-Free Compliant: Meets NSF/ANSI 61 and 372 for use in drinking water systems.

Installation Considerations

Install using press tools with manufacturer-approved jaws sized to the appropriate dimensions. Pipe ends should be deburred, cleaned, and marked for insertion depth to ensure proper sealing during press cycle. This fitting is intended for systems operating within the temperature and pressure limits defined for EPDM-sealed press fittings. Not for use in gas or steam applications unless specifically rated.

Application Scope

Commonly used in domestic water distribution, hydronic heating loops, and recirculation systems where reduced branch lines are required. Suitable for new construction, multi-unit residential buildings, and commercial retrofits where flame-free installation is preferred due to space constraints or open-flame restrictions.

Standards and Approvals

This copper press tee is manufactured in accordance with ASME B16.51 and tested to meet performance standards for leak resistance, mechanical integrity, and long-term system reliability in press-connection piping.

The 3/4 inch x 1/2 inch x 1/2 inch Copper Press Tee offers a code-compliant, time-saving solution for branching copper tubing in potable water and HVAC systems. Designed for clean, consistent, and flame-free installations in professional plumbing environments.