2 inch x 2 inch x 1/2 inch Copper Reducing Tee Copper x Copper x Copper

2 inch x 2 inch x 1/2 inch Copper Reducing Tee – For Potable Water and Mechanical Piping

The 2 inch x 2 inch x 1/2 inch copper reducing tee is manufactured for use in pressure piping systems, allowing for a branch connection to a smaller diameter pipe. This wrot copper fitting is commonly installed in domestic water distribution and hydronic heating applications. Its design accommodates a 1/2-inch branch off a 2-inch main line while maintaining consistent flow and structural integrity.

Performance and Design Benefits

• Material: Wrot copper conforming to ASTM B75/B88 standards
• Configuration: Tee with two 2 inch nominal sweat ends and one 1/2 inch nominal sweat branch
• Type: CxCxC (solder end connections for copper tubing)
• Application: Approved for potable water, HVAC, chilled water, and low-pressure steam systems
• Lead-Free Compliance: Manufactured to meet NSF/ANSI 61 and 372 for safe drinking water use

Product Advantages

• Code-Conforming: Meets applicable IPC, UPC, and IRC plumbing code requirements
• Temperature & Pressure Rated: Suitable for continuous service up to 400°F and 200 PSI when properly installed
• Corrosion-Resistant: Copper naturally resists internal scaling and maintains flow efficiency over time
• Thermal Durability: Performs reliably in both hot and cold water systems
• Formed with Tight Tolerances: Ensures proper capillary action for secure solder joints

Installation Guidelines

This tee is designed for soldered (sweat) installation and requires standard preparation of copper tubing including cleaning, fluxing, and proper application of heat with lead-free solder. Ensure branch orientation and clearance meet local code and design intent. For pressurized systems, confirm pressure ratings of joined piping and system fluid type.

Common Applications

Frequently used in potable water distribution systems, hydronic heating loops, and mechanical branch lines. Ideal for use in high-demand zones where larger supply lines transition to low-flow fixtures or terminal devices. Also applicable in commercial build-outs, hospitals, schools, and retrofits where mixed pipe sizes are present.

Did You Know?

Per federal law under the Safe Drinking Water Act, fittings used for potable systems must not exceed 0.25% lead content by weight. This reducing tee meets all federal lead-free requirements, making it suitable for installations in all 50 U.S. states.

Engineered for high-performance and long-term reliability, the 2 inch x 2 inch x 1/2 inch copper reducing tee provides a durable solution for professional-grade installations where precise sizing and leak-free operation are critical.