2 inch PVC DWV 90 Degree Street Elbow Fitting x Plastic

2 Inch PVC DWV 90° Street Elbow – Hub x Spigot

The 2 inch PVC DWV 90-Degree Street Elbow is a solvent-weld fitting used to change direction in drain, waste, and vent piping systems. With a hub (female) connection on one end and a spigot (male) end on the other, it allows for direct insertion into a socket without additional pipe segments—helpful in tight configurations or space-limited installations.

Designed for Code-Compliant DWV Systems

This elbow is molded from rigid polyvinyl chloride (PVC) and built to meet the dimensional and performance criteria of ASTM D2665. It is suitable for use in gravity-flow sanitary drainage systems in both residential and commercial construction.

• ✅ Spigot x Hub Configuration Reduces the number of fittings required by enabling direct insertion into another fitting.
• ✅ Rigid PVC Construction Corrosion-resistant and non-reactive, suitable for non-pressurized DWV applications.
• ✅ Flow Efficiency Smooth interior surfaces minimize friction losses and reduce sediment buildup.
• ✅ Code Compliance Meets applicable sections of IPC and UPC for DWV installation.

Technical Specifications

• Material: PVC (White, non-plasticized)
• Size: 2 inch nominal
• Connection Type: Spigot x Hub (Street Elbow)
• Standards: ASTM D2665, D3311; NSF 14 Listed
• Application: Gravity-fed DWV systems (non-pressurized)

Installation Guidelines

This fitting is designed for solvent-weld (glue) connections using approved PVC primer and cement. Pipe ends should be cut square, deburred, and dry-fitted before solvent welding. Observe curing times per adhesive manufacturer’s recommendations. Install with correct slope and alignment to ensure flow compliance per plumbing code.

Common Use Applications

The 2 inch DWV 90° Street Elbow is typically used to route horizontal drainage into vertical stacks or change direction within wall cavities, underfloor assemblies, or fixture branch lines. It is a staple fitting in bathroom groups, laundry drainage, and venting configurations.

Code and Safety Compliance

This fitting is third-party certified for DWV use in accordance with applicable plumbing codes. It is not suitable for pressure systems, potable water delivery, or chemical waste applications unless explicitly rated for such use by the manufacturer.

The 2-Inch PVC DWV 90° Street Elbow offers a compact, code-compliant solution for directional changes in DWV systems. Its reliable spigot-to-hub configuration allows for flexible layout adjustments while maintaining long-term structural integrity and flow efficiency.