1 inch x 1/2 inch PVC Schedule 40 Bushing Fitting x Plastic

1 inch x 1/2 inch PVC Schedule 40 Reducing Bushing – Spigot x Slip

The 1 inch x 1/2 inch PVC Schedule 40 Reducing Bushing is engineered to connect two different pipe sizes within pressure or non-pressure systems. With a spigot x slip configuration, this fitting allows insertion into a 1 inch socket fitting while accepting a 1/2 inch nominal pipe in the interior hub. Manufactured from rigid PVC, it meets applicable dimensional and material standards for use in cold water distribution and drainage systems.

Product Features and Functional Attributes

• ✅ Material: PVC (Polyvinyl Chloride), corrosion-resistant and suitable for potable and non-potable applications
• ✅ Connection: 1 inch Spigot x 1/2 inch Slip socket – designed for solvent-weld joints using PVC primer and cement
• ✅ Standard: Conforms to ASTM D2466 for Schedule 40 pressure fittings
• ✅ Operating Temperature: Up to 140°F (60°C) in pressure systems; dependent on system configuration and pressure rating

Installation Guidelines

Install using standard solvent-welding techniques. Pipe ends must be clean and square-cut. Apply primer and solvent cement to both mating surfaces before joining. Insertion depth should be verified to ensure full engagement. Allow sufficient cure time per manufacturer recommendations before system pressurization. Thread sealant or plumber’s tape is not applicable for solvent-welded slip connections.

Typical Use Cases

This reducing bushing is commonly used in the following applications:

• Potable water distribution systems requiring downsizing of branch lines
• Drainage and vent piping installations where system transitions require minimal added length
• Irrigation piping systems and light commercial utility water systems

Code and Material Compliance

Manufactured from lead-free PVC, this component is suitable for use in systems requiring compliance with NSF/ANSI 14 and 61 standards for potable water. Always confirm local code compliance for use in pressure or DWV systems prior to installation.

The 1 inch x 1/2 inch Schedule 40 Reducing Bushing provides a reliable and space-efficient method of transitioning between pipe diameters while maintaining system pressure ratings and integrity in PVC piping networks.