1 Pint PVC Cement with Applicator Cap

Details

Model: 12496
Manufacturer: IPS Weld-On
Product Name: Weld-On 735 Wet ‘N Fast Blue PVC Specialty Cement
Part Number: 913831
Container Size: 1 Pint (16 fl oz) Can
Description: Medium-bodied, extremely fast-setting, low-VOC PVC solvent cement for wet conditions and rapid pressurization, formulated for all classes and schedules through 6-inch diameter.

Product Overview

Weld-On 735 Wet ‘N Fast Blue is a professional-grade PVC solvent cement engineered for rapid assembly and pressurization of PVC piping systems under wet or humid conditions. Formulated with a ketone-based solvent blend, this medium-bodied, low-VOC cement provides exceptional bond strength and set time performance for pressure and non-pressure applications. Designed for use with all classes and schedules of PVC pipe through 6 inches in diameter (Schedule 80 up to 4 inches), the compound delivers high joint integrity even when applied to damp surfaces. It is suitable for plumbing, irrigation, and industrial piping systems requiring fast commissioning. Primer may be omitted for non-pressure systems when permitted by local codes.

Technical Specifications

• Manufacturer Part Number: 12496
• Alternate Part Number: 913831
• Product Type: PVC Solvent Cement (Wet Application Grade)
• Container Size: 1 Pint (16 fl oz) metal can with brush applicator
• Appearance: Medium-bodied, blue, syrupy liquid
• Base Solvent System: Ketone solvent blend
• Chemical Composition: Tetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Acetone
• Specific Gravity: 0.926 ± 0.02
• VOC Content: <510 g/L (Low-VOC compliant)
• Flash Point: -4°F (-20°C)
• Color: Blue
• Body Type: Medium-bodied
• Set Time: Extremely fast-setting; suitable for quick pressurization
• Pipe/Fitting Range: All classes and schedules up to 6" diameter; Schedule 80 through 4"
• Joint Type: Solvent-welded, interference-fit connection
• Pressure Rating: Suitable for pressure and non-pressure systems per ASTM D2564
• Primer Requirement: Required for pressure systems; optional for non-pressure use (if code-approved)
• Application Conditions: Formulated for wet, humid, and cold environments
• Operating Temperature Range: Up to 140°F (60°C)
• Compliance: ASTM D2564; SCAQMD Rule 1168/316A; NSF/ANSI 61 certified for potable water
• Shipping Classification: ORM-D, Consumer Commodity
• Use Case: Wet installation or rapid system start-up applications in PVC piping systems

Installation Notes

• Ensure pipe and fitting surfaces are clean and free from oil, grease, or debris prior to application.
• Apply primer when required by local plumbing codes or when working on pressure-rated systems.
• Apply an even coat of Weld-On 735 to both pipe and fitting socket using the supplied applicator brush.
• Assemble immediately with a quarter-turn twist to ensure full solvent distribution.
• Hold the joint in place momentarily to prevent push-out, then allow appropriate set and cure time before pressurization.
• Weld-On 735 allows for faster initial pressurization under specified conditions; verify per manufacturer cure chart.

Summary

The IPS Weld-On 735 Wet ‘N Fast Blue PVC Cement (1 Pint) is a medium-bodied, fast-setting solvent adhesive formulated for wet-condition installations and rapid system pressurization. Engineered for professional-grade PVC pipe and fitting assemblies up to 6 inches, it delivers durable, low-VOC performance suitable for plumbing, irrigation, and industrial applications requiring immediate operational turnaround.