1 inch Carbon Steel Water Press 90 Degree Elbow Press x Press

1/2" Carbon Steel Press 90° Elbow – Designed for High-Performance Water and Mechanical Systems

The 1/2" Carbon Steel Press 90° Elbow is a compact, precision-formed fitting engineered to support directional changes in piping systems without compromising flow integrity. It is designed for use in closed-loop water, hydronic heating, and non-potable mechanical applications requiring corrosion resistance and mechanical strength.

Manufactured from carbon steel, this elbow is press-connect ready, enabling flame-free installations and minimizing system downtime. The fitting is produced in accordance with relevant industry certifications, including IAPMO listings and ASME B16 standards, when applicable.

Performance Features

• ✅ Carbon Steel Body – Delivers excellent tensile strength and impact resistance, suitable for pressure applications up to 200 PSI.
• ✅ Press-End Connections – Compatible with standard press tools and jaws for fast, solder-free assembly.
• ✅ EPDM Sealing Element – Factory-installed elastomer designed for water applications within standard temperature and pressure limits.
• ✅ Flow Optimization – 90-degree geometry provides a smooth directional change with minimal pressure loss.
• ✅ Zinc-Coated Finish – Surface treatment for added protection against oxidation in dry or minimally corrosive environments.

Specifications

• Material: Carbon Steel (typically ASTM A420 or equivalent)
• Nominal Size: 1/2 inch
• Connection: Press x Press
• Angle: 90°
• Sealing Element: EPDM (for water systems; check for system-specific compatibility)
• Pressure Rating: Up to 200 PSI
• Temperature Range: 32°F to 250°F (with EPDM)

Applications

This press elbow is suitable for use in closed-loop hydronic heating systems, potable and non-potable water distribution (if specified), and general mechanical installations where tight directional turns are required. Frequently used in commercial and residential piping layouts, especially in retrofit conditions or installations with limited access.

Installation Requirements

Install with approved press tools and compatible jaws as specified by the fitting manufacturer. Pipe ends must be cut square, deburred, and cleaned prior to pressing. Confirm sealing element type and system compatibility before installation. Always follow the applicable mechanical code and fitting manufacturer’s installation instructions.

Material Insight

Carbon steel fittings offer enhanced mechanical properties over copper in high-pressure systems and are often selected for their cost-effectiveness and resistance to thermal expansion in mechanical piping networks.