1/2 inch Clearloc Push Fit Drop Ear 90 Degree Elbow Push x Female

1/2" Clearloc Push Fit Drop Ear 90° Elbow – Fixed Mount Transition for PEX, CPVC, and Copper

The 1/2" Clearloc push fit drop ear elbow is designed for use in residential and commercial plumbing systems requiring a secure, fixed-position 90° turn. This fitting connects 1/2" PEX, CPVC, or copper pipe to 1/2" female-threaded fixtures and incorporates mounting ears for solid anchoring to framing members. It is suitable for potable water and hydronic applications.

Technical Specifications

• Connection Type: 1/2" push-to-connect x 1/2" FNPT
• Pipe Compatibility: ASTM F876 PEX, ASTM D2846 CPVC, ASTM B88 copper
• Material: Lead-free brass body, EPDM O-ring, stainless steel retainer
• Mounting Configuration: Dual drop ear lugs with pre-drilled holes for secure installation
• Pressure Rating: 200 PSI at 73°F
• Temperature Rating: Up to 200°F maximum operating temperature
• Certifications: ASSE 1061, NSF/ANSI 61 and 372, compliant with IPC, UPC, and IRC

Applications

Used at fixed fixture locations such as shower risers, hose bibbs, or supply stubs where a change in direction and a threaded connection point are required. The drop ear configuration secures the fitting to a stud or mounting surface, ensuring stability during valve or trim-out installation.

Installation Notes

No solder, glue, or clamps are required. Insert the pipe to the full specified depth (e.g., 15/16" for 1/2" pipe) until fully seated. Secure the fitting via the integrated mounting lugs using corrosion-resistant fasteners. Threaded connections should be completed with appropriate thread sealant or PTFE tape. Removal can be performed with an approved disconnect tool.

Performance Consideration

Push fit elbows with drop ear lugs provide a flame-free, anchorable solution for high-integrity transitions between pipe and threaded components. The lead-free brass body and dual-seal O-ring assembly support long-term performance in potable and non-potable water systems.